Biostyr® is a compact, simple and innovative Biological Aerated Filter (BAF) technology with a submerged media bed that enables the treatment of pollution from municipal wastewater and industrial wastewater. With its compact structure and reduced environmental footprint, it is suitable for wider sewage treatment and is ideally suited to plants with a limited footprint, within close proximity to neighborhoods or when an expansion is desired. Its standard design and engineering with fully automated operation make it appropriate for both municipal and industrial wastewater treatment applications.
Vue d'ensemble
Biostyr® est une technologie de biofiltre simple et innovante, à filtre biologique aéré (BAF), utilisant un lit de matériau submergé pour traiter la pollution des eaux usées municipales et des eaux usées industrielles dans un ouvrage compact à faible empreinte environnementale.
Il permet à nos clients de respecter les strictes limites de rejets actuelles et convient idéalement aux installations disposant d'une emprise limitée, soumises à des contraintes de voisinage, ou nécessitant une extension.
How Biostyr works?
Biostyr is a compact biofilter technology designed for sewage treatment to eliminate both soluble and particulate pollution, requiring no final clarification process, thereby ensuring a low environmental footprint.
In a single structure, it combines a biological reactor with biofilm to eliminate soluble pollution, including chemical oxygen demand (COD), biochemical oxygen demand (BOD) and nitrogenous (N-NH4 and N-NO3) and a physical filter to store the biomass and stop particulate pollution (total suspended solids (TSS)).
Biostyr is based on the use of a light, floating filling material called Biostyrene™ which consists of polystyrene beads manufactured specifically and sized according to the application. These beads are blocked under the ceiling of the concrete structure (the cell) which is fitted with nozzles that allow the treated water to flow out. The aeration manifold is located in the lower part of the structure and optimizes the contact time between the wastewater and the process air. Historically biomass and suspended solids would accumulate inside the physical filter medium and be regularly removed by periodic backwashes. However, our lightweight material allows the system to be washed by simple gravity expansion of the filter medium using the treated water stored in the upper structure (flushing). This results in less equipment being installed (no wash pump), less maintenance and higher energy efficiency.
Features and benefits
Biostyr is particularly suitable whenever compactness is sought since it can be retrofitted to expand a site’s footprint where there is limited space, such as in tourist and resort areas, and in cities where neighbors are in close proximity. It is also suitable for mountainous areas where, due to the more volatile climates, treatment installations have to be completely protected from bad weather. It is highly tolerant of process variations in load.
It is adaptable for different applications: carbon removal only, carbon removal and ammonia oxidation (nitrification); carbon removal and combined pre-denitrification, nitrification in separate structures; carbon removal and simultaneous nitrification-denitrification; tertiary nitrification, or tertiary denitrification with the addition of a soluble carbon source (i.e. methanol)
Small footprint
Compact process requiring no further clarification
Modular design
Quick response to high load variations.
C, N, Pre-DN, NDN, PostDN
Standard design and engineering
Fully automated operation
Gravity backwash
Higher energy efficiency
Applications
Services
Resources & Gamme
Biostyr® Duo
The most compact solution for carbon and nitrogen pollution. It combines AnoxKaldnes™ MBBR and Biostyr® to treat both soluble and particulate pollution. In new facilities, its footprint is significantly smaller. In existing plants, unit capacity can be increased without major modifications.
Contact
With an increased population, many municipalities are facing the dilemma of needing to treat more wastewater but having limited land to build additional treatment facilities. This is compounded further by increasing quality regulations and the need to reduce the carbon footprint of operations. The Biostyr treatment range assures excellent effluent quality in the smallest space in a configuration that can reach almost 100 percent energy self-sufficiency.
Kim Sørensen
Senior Process and Technology Expert
Contact Kim through his LinkedIn page
FAQ about Biostyr®
What is biofiltration?
Biofiltration processes, also known as BAF, combine biological treatment, clarification and filtration into one compact system. The soluble pollution (i.e. carbon, nitrogen) is eliminated by the fixed biomass on growth support media. The effluent going through this media bed also eliminates particulate pollution (total suspended solids (TSS)). Usually built with multiple and parallel filter cells, it allows flexible operational control, based on actual flow and load conditions.
How can I update the capacity of my wastewater treatment plant with a limited expansion footprint?
To increase the capacity of your wastewater treatment plant within a limited space, consider implementing a combination of advanced technologies and process optimizations. Start by upgrading to high-rate clarifiers for improved solids removal and installing membrane bioreactors (MBR) for compact biological treatment. Enhance nutrient removal with moving bed biofilm reactors (MBBR) and employ advanced oxidation processes (AOP) for efficient contaminant breakdown. Improve sludge management through anaerobic digestion and implement SCADA systems for real-time monitoring and process optimization. For flexible capacity increases, consider modular expansion units. You can also explore vertical integration of treatment processes to maximize space efficiency. By adopting these innovative solutions, you can significantly boost your plant's treatment capacity without the need for extensive physical expansion, making the most of your limited footprint while meeting increased demand.
How can I ensure the safe treatment of pollution in municipal and industrial wastewater?
The following measures can help ensure effective pollutant treatment to protect public health and the environment:
- Implementing comprehensive influent characterization and monitoring
- Designing multi-stage treatment processes tailored to specific contaminants
- Utilizing primary, secondary and tertiary treatment methods
- Employing advanced oxidation processes (AOP) for recalcitrant pollutants
- Implementing biological nutrient removal (BNR) for nitrogen and phosphorus
- Use of activated carbon adsorption for organic compound removal
- Installing UV disinfection or chlorination systems for pathogen control
- Conducting regular effluent quality testing and monitoring
- Implementing strict operational protocols and staff training programs
- Maintaining compliance with local and national environmental regulations
- Regularly updating treatment technologies to address emerging contaminants
- Development of contingency plans for potential system failures or emergencies
Référence
La station d'épuration de Seine Aval, la plus grande d'Europe, traite quotidiennement 1,5 million de m³ pour 6 millions d'habitants. Notre filiale, OTV, a aidé la municipalité à moderniser son traitement biologique, désormais plus compact et plus respectueux de l'environnement. La mise à niveau de l'installation repose sur un système à deux files, pour un traitement biologique poussé des polluants : la file biofiltration, qui traite 80 % des volumes entrants, est composée de 150 cellules Biostyr offrant une flexibilité optimale. La file membranaire innovante traite les 20 % restants grâce à 462 000 m² de membranes d'ultrafiltration, produisant une eau de haute qualité sans réactifs chimiques. Cette double approche assure une qualité optimale de l'eau restituée à la Seine tout en réduisant l'utilisation de produits chimiques et les coûts d'exploitation.
La modernisation a permis aussi de diminuer considérablement l'emprise au sol de l'usine, la zone de traitement biologique n'occupant plus qu'un cinquième de son encombrement initial, ce qui constitue une avancée significative en matière de gestion durable de l'eau.